Masked Mercenary – Unpainted Resin Model Kit – 1/8 & 1/6 Scale – by CA 3D Studios
Masked Mercenary – Unpainted Resin Model Kit – 1/8 & 1/6 Scale – by CA 3D Studios
Made to order – printing takes 3–10 business days
Couldn't load pickup availability
Unpainted resin model kit in 1/8 or 1/6 scale. A masked mercenary with a sharp silhouette and a ready-for-action stance. Sculpted by CA 3D Studios and printed in resin in our workshop in Germany. You get the bare resin print to paint your way.
- Sizes: 1/8, about 25.3 cm (10.0") tall; 1/6, about 33.8 cm (13.3") tall
- Finish: unpainted resin, no primer or paint
- What you get: the kit ships in parts and needs gluing. Supports are removed, parts are washed, UV-cured and mostly sanded. Most painters do a little extra sanding of their own before priming.
- Sculpt: CA 3D Studios
I know what you are thinking: another masked troublemaker with too many weapons and not enough restraint. Fair assessment. I have survived bad plans, worse jokes, and the kind of silence that makes sensible people nervous. Give me a little paint, though, and I can look far more dangerous than I behave. Or exactly as dangerous. That depends on your brushwork and whether you trust me near the brightest paint.
I make no promises about dignity, subtlety, or standing still while you choose highlights. I do promise plenty of attitude, a sharp silhouette, and room for mischief.
Put me near the front of your painting queue; this unpainted resin model kit gives you a masked face and a ready-for-action stance to make your own. Finish me your way, then let me glare at every overly serious project on the shelf.
Which Size: 1/8 or 1/6?
Which Size: 1/8 or 1/6?
For a typical standing character (165–180 cm tall), 1/8 is about 21–23 cm (8–9 in) and 1/6 is about 27–30 cm (11–12 in).
Your figure can be taller or shorter than that. Big wings, a weapon or a tall base add height. A character sitting on a motorcycle or lying down ends up far lower than a standing one, so even a 1/6 figure can be around 15 cm tall.
The size shown in the listing is the full height of the finished figure, from the bottom of the base to the very top. That's the number to go by.
Our advice: 1/8 for a collection, 1/6 for the one figure you want noticed first.
Made for Painters
Made for Painters
You get the bare resin print. No primer, no paint, so every color choice is yours. The kit ships in parts and needs gluing.
Most painters do a little extra sanding before priming. We do the heavy cleanup, so you start from a prepared surface.
Printed in Our Own Resin Blend
Printed in Our Own Resin Blend
We print every kit ourselves on an Anycubic Photon Mono M7 Max resin printer. The resin is our own blend. It holds fine detail and stays slightly flexible, which makes thin parts less brittle than in standard resin prints.
Most kits are hollowed where it makes sense. That keeps the weight down and takes stress off large parts. Resin is still resin: drops and hard squeezes can break it, so handle it gently while you build and paint.
Clear and Tinted Parts
Clear and Tinted Parts
Some kits come with clear or tinted resin parts, for example energy blades, crystals, water or magic effects. You can leave them clear or paint around them.
It depends on how the model is built. Want clear parts, or a certain resin color, on a kit that doesn't have them? Ask before you order and we'll tell you what's possible.
Cleaned, Cured and Sanded
Cleaned, Cured and Sanded
Every kit is cleaned, cured and sanded before it goes in the box. We remove the supports by hand, wash the parts in an ultrasonic cleaner, cure them fully under UV light, then sand and prepare the surface.
We also move supports to less visible spots wherever we can, so they don't hurt important details. Perfection doesn't exist, and a few small spots may still need your attention. We keep that work to a minimum.
Packed to Arrive in One Piece
Packed to Arrive in One Piece
Each kit is wrapped and packed with protective materials made for resin models, and fragile parts get extra protection. Large kits often travel in several parts, each packed separately.
Tracking is included whenever the shipping service provides it. If something arrives damaged, write to us right away with photos of the damage and the packaging, and we'll work out a fair solution with you. If a part breaks later, send photos and we'll look at the options.
Follow the Progress
Follow the Progress
Want to follow along? Ask, and we'll send photos while your kit is printed and prepared. We can do this for many projects, depending on the kit and our schedule.
Prefer to wait for the box? That's fine too. It arrives when it's done.
